-40% Dquad Obsesion V2  Drone racing special Pro

Dquad Obsesion  Drone racing special Pro Masterpiece. V2

The Obsession is a Strong X quad what is suitable for indoor/outdoor, race/freestyle, advanced/middle/beginner.

This frame is easy to build and to service when needed. The frame has 4 swappable 4mm carbon arms that are coming together in the middle without any friction. Why not have a unibody that is 2 gram lighter? That’s because we like to give the pilots a opportunity to get up in the air asap and that’s only possible when you have those nice swappable arms. These 4 arms are held together with a 1.5mm carbon bottom plate and a 1.5mm identical Top plate.

Its also possible to build it with the included 1.6mm thick PDB what makes it really nice. The PDB is not one with lots features on it. We like to keep this clean and simple therefore it has only the + and – on it for the esc’s, power connector, and extra’s. On top of the PDB or top plate is enough room to double stack you hardware, like FC, 4in1 esc, VTX, OSD, RX, and so on.

Then we have our 7075 Aircraft Aluminium as a roll cage that has 2 1.5mm carbon side plates that holds the FPV cam in place. A recommended FPV cam for this is a HS1190. On the backside of the roll cage you will find a 2mm carbon VTX antenna mount. This VTX antenna mount is installed in a 45deg angle.

Build manual for the Dquad Obsession can be found here.

If you are doing stunts, races or just having the greatest time of your live in the air and like to capture that in HD than a HD action cam is needed. Action cams are having a hard time to survive on a quad. We have made a 3D Gopro session design in 30 and 40deg what can be fitted directly on top of the roll cage without the need of a strap. Just use 4 screws and you are ready to go. With this nice tide fitted and perfect protected Gopro session cam on your quad you will be able to show all your family and friends your best moments.

Gopro Session protection case 3D file available for download. Install session directly on top. No strap needed.

30 degrees angle for sport flying

40 degrees angle for crazy hardcore racing

Don't have any access to a 3D printer? Check out our selection of printed GoPro mounts here.



What can you expect in a box full of Obsession hardware and the specs of it.

210mm size 5” frame

Frame weight 94 / 95  gram

4x 4mm carbon arms

2x 1.5mm Carbon bottom/top plate

1x 1.6mm PDB

2x 1.5mm FPV side plate

2x 7075 Aircraft Aluminium roll cage Bracket

1x 2mm VTX antenna mount

1x 3D designed XT60 connector holder (without XT-60 connector)

1x Fastener kit incl: bolts, nuts and spacers

1x Battery strap

2x sticker

1x Manual QR code card.

Geef beoordeling

Note: HTML-code wordt niet vertaald!
    Slecht           Goed


Dquad Obsesion V2 Drone racing special Pro

  • Model: dquad obsesion
  • Beschikbaarheid: Op voorraad
Deze aanbieding vervalt over:
  • €98,00
  • €59,00
  • Excl. BTW: €48,76

Tags: Dquad Obsesion Drone racing special Pro Masterpiece., V2