-30% Dquad Obsesion V2  Stretched Drone racing special Pro, Gold

Dquad Obsesion V2  Stretched Drone racing special Pro, Gold

This is a stretched version of the Dquad Obsession frame. The dimensions from front to rear is longer compared to the dimsension from left to right. This extra length should give a bit more stability on the pitch axis. Stretched X frames are mostly used for high speed racing. For freestyle flying a symetrical X is recommended.

The stretched version of the Obsession does not have a PDB option. Use 4in1 esc's or a Matek PDB.

This frame is easy to build and to service when needed. The frame has 4 swappable 4mm carbon arms that are coming together in the middle without any friction. Why not have a unibody that is 2 gram lighter? That’s because we like to give the pilots a opportunity to get up in the air asap and that’s only possible when you have those nice swappable arms. These 4 arms are held together with a 2mm carbon bottom plate and a 2mm identical Top plate.

Then we have our 7075 Aircraft Aluminium as a roll cage that has 2 1.5mm carbon side plates that holds the FPV cam in place. A recommended FPV cam for this is a HS1190. On the backside of the roll cage you will find a 2mm carbon VTX antenna mount. This VTX antenna mount is installed in a 45deg angle.

Build manual for the Dquad Obsession can be found here.

If you are doing stunts, races or just having the greatest time of your live in the air and like to capture that in HD than a HD action cam is needed. Action cams are having a hard time to survive on a quad. We have made a 3D Gopro session design in 30 and 40deg what can be fitted directly on top of the roll cage without the need of a strap. Just use 4 screws and you are ready to go. With this nice tide fitted and perfect protected Gopro session cam on your quad you will be able to show all your family and friends your best moments.

Gopro Session protection case 3D file available for download. Install session directly on top. No strap needed.

30 degrees angle for sport flying

40 degrees angle for crazy hardcore racing

Don't have any access to a 3D printer? Check out our selection of printed GoPro mounts here.



What can you expect in a box full of Obsession hardware and the specs of it.

210mm size 5” frame V2

Frame weight 94 / 95  gram

4x 4mm carbon arms

2x 2mm Carbon bottom/top plate

2x 1.5mm FPV side plate

2x 7075 Aircraft Aluminium roll cage Bracket

1x 2mm VTX antenna mount

1x Fastener kit incl: bolts, nuts and spacers

1x Battery strap

2x sticker

1x Manual QR code card.

Geef beoordeling

Note: HTML-code wordt niet vertaald!
    Slecht           Goed


Dquad Obsesion V2 Stretched Drone racing special Pro, Gold

  • Model: obsesion stretched
  • Beschikbaarheid: Op voorraad
Deze aanbieding vervalt over:
  • €99,00
  • €69,00
  • Excl. BTW: €57,02

Tags: Dquad, Obsesion, V2, Stretched, Drone, racing, special, Pro, Gold